Kyocera FS-6700 manual Correcting a Paper Jam

Models: FS-6700

1 224
Download 224 pages 17.42 Kb
Page 165
Image 165

5.6. Correcting a Paper Jam

When the jammed paper has been removed, open and close the printer’s top cover or the paper feed unit. Then the printer automatically warms up, goes on-line, and continues printing. Depending on the point at which the jam occurred, the printer may or may not print the jammed page.

If paper jams occur frequently, try using a different type of paper, replace with paper from another ream, turn the stack of paper over, or turn the paper the other way around. Read the information in Appendix B. Also, look for tiny pieces of paper that may have been torn off and overlooked when the jammed paper was removed.

If you cannot solve the problem by changing the paper, there may be a problem with the printer.

Call a service person.

Note

When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult to remove and may be easily overlooked, deterring the jam recovery.

The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in burn injury. Remove jammed paper carefully.

Fuser Unit

Rear Cover

Figure 5.2. Rear Cover

5-20

Page 165
Image 165
Kyocera FS-6700 manual Correcting a Paper Jam