Kyocera FS-6700 manual RS-232C/RS-422A Protocol, H1 Baud rate Parameter value, H2 Data bits

C.3. RS-232C/RS-422A Protocol

C.3.RS-232C/RS-422A Protocol

A protocol is a set of rules the computer follows in sending data to the printer. The RS-232C/RS- 422A parameters are stored in battery backed-up memory. They are indicated on the status printout. They can be changed by the FRPO (firmware reprogram) command described in the Programming Manual. The parameters and their identification codes are given below.

H1: Baud rate

Parameter value Baud rate

242400

484800

969600

1919200

3838400

5757600

11115200

The factory setting is 9600 baud.

H2: Data bits

7 or 8, factory-set to 8.

H3: Stop bits

1 or 2, factory-set to 1.

C-14