Kyocera FS-6700 manual Canceling Printing

Chapter 2 Operating the Laser Printer

Canceling Printing

Perform the following procedure when you wish to cancel printing after it has begun.

1.Check if the message Processing is displayed in the message display.

2.Press the ON LINE key to take the printer offline.

3.Perform the necessary procedure on the computer to halt printing.

4.Press the CANCEL key.

5.The message Print Cancel? will appear in the message display and the interface to be canceled will be displayed.

The following interfaces may be displayed.

Parallel

Serial

Option 1 (only when an optional interface is installed)

Option 2 (only when an optional interface is installed)

6.Selecting the interface to cancel using the + or –key and then press the ENTER key. Printing from the interface selected will be stopped.

A few pages may be printed even after the CANCEL key is pressed as remaining data received before the CANCEL key was pressed is printed.

The message Print Cancel? Current job will also be displayed when the CANCEL key is pressed for the purpose of stopping the printing of status pages or font lists from the control panel. When the ENTER key is pressed, the message Cancelling data appears in the message display and printing stops after the printer finishes printing the current page.

2-15