Multi-unit Operation
34
Cancelling a base unit
A handset can be registered to a maximum
of 4 base units. A handset can cancel a base
unit that it is registered to. This allows the
handset to “forget” the base unit.
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Registration”, then press
{>}.
4Enter “335”.
5Select “Cancel Base”, then press
{>}.
6Enter “0000” (default handset PIN).
LIf you changed the PIN, enter it (page
22).
7Select the base unit(s) you want to
cancel, by pressing the desired base unit
number.
LThe selected base unit number(s) will
flash.
LTo cancel a selected base unit
number, press the number again. The
number will stop flashing.
8Press {j/OK}.
9Select “Yes”, then press {>}.
10 Press {ih}.
Note:
LTo register the handset to another base
unit or to the same base unit again, see
manual registration (page 33).
Increasing the range of the base
unit
You can increase the range of the base unit
by using a DECT repeater. Please use only
the Panasonic DECT repeater noted on
page 5. Consult your Panasonic dealer for
details.
Important:
LBefore registering the repeater to this
base unit, you must turn the repeater
mode on.
Turning the repeater mode on/off
1Press {j/OK}.
2Select “Base Unit Setup”, then
press {>}.
3Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page
28).
4Select “Other Options”, then press
{>}.
5Select “Repeater Mode”, then press
{>}.
6Select “On” or “Off”, then press {>}.
7Press {ih}.
Note:
LAfter turning repeater mode on/off, you
will not be able to make or receive calls for
a few moments.
Intercom between handsets
Intercom calls can be made between
handsets in the same radio cell, but not
between handsets in different radio cells.
Example: When handset 1 calls handset 2
1Handset 1:
Press {INT} and {2} (desired handset
number).
2Handset 2:
Press {C} or {s} to answer.
3When finished talking, press {ih}.