Panasonic KX-TG1810NZ specs

Base Unit Settings

Other options

Changing the base unit PIN (Personal Identification Number)

For security, the base unit PIN must be entered when changing certain settings. The default PIN is “0000”.

Important:

LIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it.

4Select “Other Options”, then press {>}.

5Select “Base Unit PIN”, then press {>}.

6Enter the new 4-digit base unit PIN, then press {j/OK}.

7Press {ih}.

Resetting the base unit to its default settings

1Press {j/OK}.

2Select “Base Unit Setup”, then press {>}.

3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page

28).

4Select “Other Options”, then press {>}.

5Select “Reset Base”, then press {>}.

6Select “Yes”, then press {>}.

7Press {ih}.

Note:

LThe following items will be deleted or reset to their default settings:

–Settings listed on page 24

–Caller list

LThe following items will be retained:

–Date and time

–Repeater mode

28

Image 28

Panasonic KX-TG1810NZ operating instructions Changing the base unit PIN Personal Identification Number

Contents

Model No. KX-TG1810NZ Introduction Feature highlights Night modePhonebook Phonebook category Making/Answering Calls Included accessories Accessory informationAdditional/replacement accessories Battery caution Important informationGeneral Environment Controls and displays ControlsMicrophone Base unit Charge contact Connections DisplaysDisplay icons Display Meaning Icon Battery charge Battery installationBattery strength Battery icon Turning the power on/off Battery replacementSetting the date and time Example 330 PM Redial feature Making calls Other features Answering calls Using the phonebook Adding entries to the phonebookCategories Finding and calling a phonebook entry Erasing entries from the phonebook One touch dialErasing an entry Erasing all entries Copying phonebook entries to other handsets Chain dialCopying one entry Copying all entries Guide to handset settings Handset settings Sub-menu Default setting Menu Time settings Ringer setupAlarm Ringer volume Night mode Setting the start and end time for night modeTurning night mode on/off Setting the ring delay for night mode Display setup Selecting the standby mode displaySelecting categories to bypass night mode Changing the display language Call options Other options Resetting the handset to its default settings Guide to base unit settings Base unit Sub-menu Default Settings menu Night mode Select Base Unit Setup, then press Changing the recall time Setting pause lengthStoring/changing emergency numbers Setting call restriction Selecting area codes to be deleted automatically Resetting the base unit to its default settings Changing the base unit PIN Personal Identification Number Using Caller ID service Category features for Caller ID subscribers Caller list Viewing the caller list and calling backEditing a caller’s phone number before calling back Erasing caller information Call minder Operating additional units Registering a handset to a base unitAdditional handsets Additional base units Cancelling a handset Selecting a base unit Cancelling a base unit Turning the repeater mode on/offIntercom between handsets Increasing the range of the base unit Transferring calls between handsets, conference calls Wall mounting 60 mm Screws Hooks Available character entries Character entry modes Extended 2 character table O Extended 1 character table NCyrillic character table P Initial settings TroubleshootingProblem Cause & solution Telephone Useful Information Specifications Index PIN Customer Support Centre Tel. No 272 Sales Department Copyright