Handset Settings
21
Selecting categories to bypass night
mode
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
4Select “Night Mode”, then press {>}.
5Select “Select Category”, then
press {>}.
6Press the desired category numbers,
then press {j/OK}.
LThe selected category number will
flash.
LTo cancel a selected category
number, press the number again. The
number will stop flashing.
7Press {ih}.
Note:
LIf a call is received from one of the
categories set to bypass night mode, only
the handset will ring.
Display setupSelecting the standby mode
display
“Base Number”: The current base unit
number is displayed.
“Handset Number”: The current handset
number is displayed.
“Off”: Only the current date and time are
displayed.
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Display Setup”, then press
{>}.
4Select “Standby Display”, then
press {>}.
5Select the desired setting, then press
{>}.
6Press {ih}.
Note:
LIf “Base Number” is selected and the
current base unit number is 2, “-2-” is
displayed.
LIf “Handset Number” is selected and the
current handset number is 2, “[2]” is
displayed.
Changing the display language
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Display Setup”, then press
{>}.
4Select “Select Language”, then
press {>}.
5Select the desired language, t hen press
{>}.
6Press {ih}.
Note:
LIf you select a language you cannot read,
press {ih},{j/OK}, press {e} 2
times, press {>}, press {v} 2 times,
press {>}, press {v}, press {>}, select
the desired language, then press {>}.
Press {ih}.
Changing the display contrast
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Display Setup”, then press
{>}.
4Select “Contrast”, then press {>}.