NPort 5400 Series User’s Manual | Web Console Configuration |
Reverse Telnet Mode
TCP alive check time
Setting | Factory Default | Necessity |
0 to 99 min | 0 | Optional |
Specifies the time slice for checking if the TCP connection is alive. If no response, the NPort 5400 will disconnect the original connection.
Inactivity time
Setting | Factory Default | Necessity |
0 to 65535 ms | 0 | Optional |
|
|
|
Idle time setting for | means it will never disconnect. |
|
Local TCP port |
|
|
Setting | Factory Default | Necessity |
1 to 65535 | 4001 | Optional |
|
|
|
Each of the NPort’s serial ports is mapped to a TCP port. To avoid conflicts with TCP ports, set port numbers to 4001 for port1, 4002 for port 2, etc. (like the default values).
Map <CR-LF>
Setting | Factory Default | Necessity |
CR, LF, or |
| Optional |
|
|
|
If data received through the NPort 5400’s Ethernet port is sent using the “enter” command, the data will be transmitted out the serial port with an added
(1)“carriage return + line feed” if you select the
(i.e., the cursor will jump to the next line, and return to the first character of the line)
(2)“carriage return” if you select the <CR> option
(i.e., the cursor will return to the first character of the line)
(3)“line feed” if you select the <LF> option.
(i.e., the cursor will jump to the next line, but not move horizontally)
