Moxa Technologies 5400 Series Serial Settings, Auto report to IP, Auto report to UDP port

NPort 5400 Series User’s Manual Web Console Configuration

configure the Auto IP report function. There are two ways to develop an “Auto IP report Server” to receive the NPort’s Auto IP report.

1.Use NPort Administrator’s IP Address Report function.

2.Refer the Appendix E for the “Auto IP report protocol” to develop your own software.

Auto report to IP

Setting	Factory Default	Necessity
E.g., 192.168.1.1 or URL	None	Optional
(IP addresses of the form x.x.x.0 and
x.x.x.255 are invalid.)

Reports generated by the Auto report function will be automatically sent to this IP address.

Auto report to UDP port

Setting	Factory Default	Necessity
E.g., 4001	4002	Optional
Auto report period
Setting	Factory Default	Necessity
Time interval (in seconds)	10	Optional

Serial Settings

Click on Serial Settings, located under Main Menu, to display serial port settings for ports 1 and 2.

To modify serial settings for a particular port, click on either Port 1 or Port 2 under Serial Settings.

5-9