Moxa Technologies 5400 Series user manual Network Settings, Reset button protect

NPort 5400 Series User’s Manual		Web Console Configuration
	password, press SEL, etc. Once the password has been entered, press SEL until the LCM screen is
	activated.
	Reset button protect
	Setting	Factory Default	Necessity
	No or Yes	No	Required
	Options are No and Yes, with default = No.

NOTE: Select the Yes option to allow limited use of the Reset Button. In this case, the Reset Button can be used for only 60 seconds. I.e., 60 sec. after booting up, the Reset Button will be disabled automatically.

Network Settings

You must assign a valid IP address to the NPort 5410/5430/5430I/5450/5450I before it will work in your network environment. Your network system administrator should provide you with an IP address and related settings for your network. The IP address must be unique within the network (otherwise, the NPort 5410/5430/5430I/5450/5450I will not have a valid connection to the network). First time users can refer to Chapter 3, Initial IP Address Configuration, for more information.

You can choose from four possible IP Configuration modes—Static, DHCP, DHCP/BOOTP, and BOOTP—located under the web console screen’s IP configuration drop-down box.

Method	Function Definition
Static	User defined IP address, Netmask, Gateway.
DHCP	DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
	Server
DHCP/BOOTP	DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
	Server, or BOOTP Server assigned IP address
BOOTP	BOOTP Server assigned IP address

5-6