04Getting started

10Press ENTER to exit the Setup Navigator, or select ‘Go Back’ if you want to start again.

Initial Setup

 

 

Basic

Clock Set

 

Tuner

Input Line System

 

Video In/Out

Setup is complete!

On Screen Display

 

Audio In

Enjoy using your DVD recorder!

Front Panel Display

Finish Setup

Audio Out

Power Save

Language

Remote Control SetGo Back

Recording

Setup Navigator

 

Playback

 

 

That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It’s possible, however, that you may want to make a couple of additional settings, depending on how the recorder tuned into the terrestrial TV channels.

Manual channel setting – This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setting on page 78.

ShowView channel setting – This setting lets you assign guide channels to ensure that the ShowView® programming system works correctly. See ShowView CH Setting on page 79.

Setting up the remote to control your TV – You can set up the supplied remote control to control many brands of TV. See Setting up the remote to control your TV on page 90.

Making your first recording

This quick guide shows you how to make a basic recording of a TV program to a recordable DVD.

Recording is covered in much more detail in chapter 6 (Recording).

STANDBY/ON

OPEN/CLOSE

CHANNEL

PLAY

STOP

REC STOPREC

DVD RECORDER

1 If they aren’t already on, switch on your TV and this recorder.

Press STANDBY/ON to switch on.

• Make sure that the video input on your TV is set to this recorder.

2 Press OPEN/CLOSE to eject the disc tray.

3 Load a blank DVD-R or DVD-RW disc with the label face-up, using the disc guide to align the disc.

• When you load a new, blank DVD-RW disc, the recorder will take a moment to initialize it for recording.

4 Use the CHANNEL +/– buttons on the remote control or the SMART JOG on the front panel to select the TV channel you want to record from.

• Channel presets are numbered 1–99.

28

En

Page 28
Image 28
Pioneer DVR-3100 Making your first recording, Other settings you can make, Press OPEN/CLOSE to eject the disc tray