Getting started 04
29
En
English
•If the recorder is connected to your TV using a SCART
cable and your TV supports Direct Recording, you
can use this to very simply start recording the TV
channel you’re currently watching. See
Direct
recording from TV
on page 48 for detailed instructions.
5 Press
REC to start recording.
•By default, the recording will be in
SP
(standard play)
mode, which will give you around 2 hours of
recording from a blank DVD disc.
• You can pause recording by pressing
PAUSE
.
Press
REC
or
PAUSE
again to restart recording.
6 When you want to stop recording, press
STOP REC.

Playing back your recording

The TV program you just recorded should be on the DVD
disc as a single title with one or more chapters.
• Press
PLAY to start playback.
If you want to stop playback before the end of the
recording, press
STOP
.
Using the built-in TV tuner

Changing TV channels

When no disc is playing, you can change TV channels in
three different ways:
•
CHANNEL +/–
buttons on the remote
•
Number buttons
on the remote – For example, to
select channel 4, press
4
then
ENTER
; for channel 34,
press
3
,
4
,
ENTER
.
•
SMART JOG
on the front panel
Note
• Channel presets are numbered 1–99.
• You can’t change TV channels during playback or
recording, or while in recording standby.

Changing audio channels

You can change the audio channel of the broadcast or
external input signal.
• Press AUDIO to change the audio.
The current audio channel is displayed on-screen.
•If the NICAM audio setting (see
NICAM Select
on
page 81) is set to
NICAM
and you are watching a
NICAM broadcast, you can switch between
NICAM
and
Regular
(non-NICAM) audio.
• If the NICAM broadcast is bilingual, you can also
select the language.
You can also select the language for a non-NICAM bilingual
broadcast.
• When watching a recording made from an external
input with
Bilingual
recording selected (see
External
Audio
on page 81), you can switch the audio channel
between left (
L
), right (
R
) or both (
L+R
).
Note
• If a Video mode disc is loaded, or if the recording
mode is
FINE
/
MN32
, only one channel of a bilingual
broadcast is recorded. In this case, decide which
language you want to record before recording by
setting the Bilingual Recording setting (see
Bilingual
Recording
on page 82).
ENTER
CHANNEL
AUDIO
NICAM
Regular
NICAM A NICAM B
Regular NICAM A+B
A (L) B (R)
A + B (L+R)
LR
L+R
DVR-03_EU.book 29ページ ２００３年７月２８日　月曜日　午後７時１９分