Pioneer DVR-3100 operating instructions Scart AV Connector

02Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this page.

Using the setup on this page you can:

• Record scrambled channels received using the recorder’s built-in TV tuner.

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV receiver.

		ANTENNA
		IN
1	2	SCART AV	TV
		CONNECTOR

		AV 2/INPUT 1				AV 1(RGB)-TV
IN
INPUT 1/				OUTPUT		DIGITAL	CONTROL	AC IN
AUTO REC						OUT
R	L		R	L
OUT
AUDIO	VIDEO	S-VIDEO	AUDIO	VIDEO	S-VIDEO	OPTICAL	IN
VHF/UHF

1 3

SCART AV

CONNECTOR

Antenna/cable TV	Decoder
wall outlet

1 Connect RF antenna cables as shown.

This enables you to watch and record TV channels.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2/ (INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box.

This enables you to record scrambled TV channels.

Note

•In order to use this setup, you will need to make the following settings from the Initial Setup menu:

–Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 80).

–From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 78).

18

En