Pioneer DVR-3100 operating instructions Connecting up Using other types of audio/video output

Connecting up

Using other types of audio/video output

If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video output.

Using the supplied audio/video cable Using the S-video output

02

English

AUDIO
INPUT
VIDEO
INPUT
TV
2	1
AV 2/INPUT 1	AV 1(RGB)-TV

	AUDIO
	INPUT
2	TV

S-VIDEO

INPUT

1

IN
INPUT 1/				OUTPUT		DIGITAL	CONTROL	AC IN
AUTO REC						OUT
R	L		R	L
OUT
AUDIO	VIDEO	S-VIDEO	AUDIO	VIDEO	S-VIDEO	OPTICAL	IN
VHF/UHF

		AV 2/INPUT 1				AV 1(RGB)-TV
IN
INPUT 1/				OUTPUT		DIGITAL	CONTROL	AC IN
AUTO REC						OUT
R	L		R	L
OUT
AUDIO	VIDEO	S-VIDEO	AUDIO	VIDEO	S-VIDEO	OPTICAL	IN
VHF/UHF

1Connect the VIDEO OUTPUT jack to a video input on your TV.

Use the yellow jack of the supplied audio/video cable for the video connection.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

1Use an S-video cable (not supplied) to connect the S-VIDEO OUTPUT to an S-video input on your TV, monitor (or other equipment).

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

You can use the supplied audio/video cable, leaving the yellow video plug disconnected. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

15

En