Lexicon MPX G2 manual MIDI Ctl Send, Knob= CC78, Ctl Send Selections, Options: MIDI Reset

MPX G2 User Guide Lexicon

Ctl Send

Ctl Send Selections

None	ABTrg
Off	Pedal
On	Tog 1-3
Knob	Sw 1-3
Puls1	CC 1-31
Tri1	CC33-119
Sine1	Bend
Cos1	Touch
Puls2	Vel
Tri2	Last Note
Sine2	Low Note
Cos2	High Note
Rand	Tempo
Env	Cmnds
InLvl	Gate
RnLvl	Trig
A/B	LGate
ATrg	TSW
BTrg	Toe

If Transmit is active (set to any channel), you can select any of the controllers shown to the side to transmit MIDI controller messages if they are used in a patch.

The display presents two selection fields for mapping the controllers as shown below.

MIDI Ctl Send

< > Knob= CC78

Two fields are available for mapping

MPX G2 controls to MIDI controllers.

Press Options to access MIDI Reset.

Press Yes in response to the display prompt to reset all patched parameters to their stored values. Press Options again to return to the MIDI Ctl Send menu.

Options: MIDI Reset

The MPX G2 recognizes the “Reset All Controllers” MIDI message. When received, all patched parameters are reset to their stored values. Patched parameters may also be reset from the MPX G2 front panel —in System mode select Ctl Send from the MIDI menu and press Options, then press Yes. (The message will be transmitted from the MPX G2 as well). If you do not want to perform the reset, press Options to exit.

Ctl Smooth The Ctl Smooth parameter is an intelligent filter that provides a smoothing function for incoming MIDI data. At 100, the filter is essentially bypassed. With decreasing values, the filter becomes more sluggish in its response to small MIDI controller value changes while maintaining a fast response to large changes. This is useful for smoothly interpolating sparse MIDI controller data. As the value is lowered, the filter's response slows for both large and small MIDI controller value changes.

Clock Send You can choose to have the MPX G2 transmit MIDI Clock at the current tempo rate by setting this control to On and Tempo Source (in the Edit menu) to Internal. If this control is set to Off, MIDI Clock will not be transmitted.

5-8