Lexicon MPX G2 manual Utility, All Configurations, JamMan, Stand Alone

MPX G2 User Guide Lexicon

JamMan

(Stand Alone)

Utility

(All Configurations)

Programs 245-248 are set up to have the MPX G2 front panel buttons or the MPX R1 control:

Tap = Record Loop

A/B = Layer

Delay = Clear Loop

245 Jam 1 S&H+

Loads with moderately clean preamp and a Sample & Hold style effect into a large hall Reverb. The MPX R1 pedal controls the volume, or volume with sweep filter scale, depending on the state of the Toe Switch.

246 Jam1Cordovox

Loads with a creamy overdriven preamp and a Cordovox effect with reverb. The MPX R1 Toe Switch turns the Cordovox effect on and off, the pedal controls the Cordovox speed.

Programs 247 and 248 are set up to have the MPX G2 front panel buttons or the MPX

R1 control:

Tap = Record Loop

A/B = Replace

Delay = Start/Stop Loop

247 Jam 2 Pitch+

Loads with high-gain preamp, Pitch and Ambience. The MPX R1 Toe Switch swaps pedal controls between volume (Toe Switch off) and pitch (Toe Switch on).

248 Jam2AutoWah

Clean style preamp with auto wah. The MPX R1 Toe Switch determines whether the pedal controls volume or wah.

249 Unity Gain

This program is set up for testing a unity gain signal in all configurations.

250 Clean Slate

Want to start from scratch? This one’s as empty as they get.

9-30