Configuring System Logging
Enable Digi CM Memory
The Digi CM memory is already enabled for port logging and only needs to be configured for system or port logging. When storing log files to the Digi CM local memory, a total of 3.5M is available. The amount of memory per serial port is dependent on the port count of the Digi CM used. The log file sizes are shown in the following table are maximum settings. See also Configuring System Logging on page 36.
Digi CM | System Log | Port Log | Total Memory Used | |
(per port) | ||||
|
|
| ||
|
|
|
| |
8 |
| 400K |
| |
|
|
|
| |
16 | 300K | 200K | 3.5M | |
|
| |||
32 | 100K | |||
|
| |||
|
|
|
| |
48 |
| 66K |
| |
|
|
|
|
Configuring System Logging
To configure the Digi CM for system logging, do the following:
1.Access the web interface.
2.Under System status & log, click System logging.
3.Choose Enabled for System logging and the log buffer size.
4.From the System log storage location, choose the location you want from the drop down menu. The choices available are dependent on what you have enabled and/or installed. The Digi CM memory choice is always available.
System logging - Enable or Disable
System log storage location - Memory or NFS server
System log to SYSLOG server - Enable to store system logs to a SYSLOG server
System log buffer size (KB, 300 max) - Log buffer size in KB
Send system log by Email - Enable or Disable
Number of log messages to send a mail
36 | Chapter 5 |
