Authentication
Field Descriptions for Sniff Sessions
Escape | Description of Action | Occurrence | |
Sequence | |||
Ctrl+ |
|
| |
|
|
| |
m |
| only presented to users with | |
take over main session (read/write) | read/write access upon entering | ||
|
| a session | |
|
|
| |
s |
| only presented to users with | |
enter as a slave session (read only) | read/write access upon entering | ||
|
| a session | |
|
|
| |
b | send break | not functional for sniff users | |
|
|
| |
l | show last 100 lines of log buffer | must enable logging for this | |
option | |||
|
| ||
|
|
| |
d | disconnect a sniff session | only functional to admin | |
|
|
| |
a | send message to port user(s) | not available to sniff users | |
|
|
| |
r | reboot device using | only if power management is | |
available on this port | |||
|
| ||
|
|
| |
p |
| (show only on or off) only if | |
power device on/off | power management is available | ||
|
| on this port | |
|
|
| |
x | close current connection to port | closes the sniff session | |
connection | |||
|
| ||
|
|
|
Authentication
1.Access the configuration menu.
2.Choose Serial port configuration.
3.Choose an individual port number or 0 (zero) for all ports > Authentication.
4.Choose Authentication type.
132 | Chapter 16 |