Digi Digi CM manual Enable a Compact-flash Card

System and Port Logging

4.Enter the IP address of the primary and secondary (if applicable) syslog server and select the syslog facility from the drop down menu.

5.Click Save & apply.

Enable A Compact-flash Card

The compact-flash card must be installed and configured on the Digi CM before it can be used for system logging or storing Digi CM configuration information. When storing log files to an external flash card, the size of the available storage is dependent on both the size of the card and the port counts of the Digi CM used. The maximum settings for log file sizes are listed in the following table. See also Adding a Compact-flash Card on page 27.

Total Flash	Digi CM	System Log	Port Log	Total Memory
Card Size			(per port)	Used
	8	4.6	3.1M
32	16	4.6	1.53M	29M
	32	4.6	762K
	48	4.6	500K
	8	9.2	6.2M
64	16	9.2	3.1M	58M
	32	9.2	1.53M
	48	9.2	1.02M
	8	18.4	12.3M
128	16	18.4	6.2M	118M
	32	18.4	3.1M
	48	18.4	2.0M
	8	36.8	24.6M
256	16	36.8	12.3M	236M
	32	36.8	6.2M
	48	36.8	4.1M

Chapter 5 35