Dial-in Terminal Server Access

5.Use the ESC key to return to the main menu.

6.Choose Save changes.

Dial-in Terminal Server Access

Individual serial ports on the Digi CM can be configured for a dial-in terminal server access. To use dial-in terminal server access, an external modem is first attached to a serial port on the Digi CM and then the serial port is configured for dial-in terminal server mode. In the illustration below, port 7 is configured for dial-in terminal server mode.

In terminal server mode, you are connected directly to a server.

To configure a serial port for a dial-in terminal server, do the following:

1.Access the configuration menu.

2.Choose Serial port configuration.

3.Choose an individual port number and then Host Mode Configuration.

4.Choose Dial-in Terminal Server and configure the other configuration parameters.

134

Chapter 16

Page 134
Image 134
Digi Digi CM manual Dial-in Terminal Server Access