Configuring Smtp Alerts, Snmp Information | Digi Digi CM specification

The Digi CM supports SNMP authentication, power on, and link up traps.

Configuring SMTP Alerts

Configuring SMTP Alerts

Most SMTP servers check the sender’s email address with the host domain name to verify the address as authentic. Consequently, when assigning an email address for the device email address, any arbitrary username with the registered hostname may be used. An example is username@company.com.

To configure the Digi CM for SMTP alerts, the following parameters are required: SMTP server - Use either the hostname or the IP address.

Device mail address - Specify the sender’s email address for the log and alarm delivery.

SMTP mode - Specify the type of SMTP server to use.

Username and password - These fields are required for POP before SMTP and SMTP with authentication servers.

To configure SMTP alerts on the Digi CM, do the following:

1.Access the web interface.

2.Under the Network heading, choose SMTP configuration.

3.Fill in the required fields. SMTP with authentication and POP before SMTP require usernames and passwords.

4.Click Save & apply.

SNMP Information

Applications such as NMS (Network Management System) or an SNMP browser can exchange information with the Digi CM and control actions to the unit. The protocol functions defined for SNMP includes GET, SET, GET-Next, GET-Bulk, and TRAP. Below are the definitions of the protocol functions found in SNMP. Authentication, power on, and link up traps are supported.

.

	Protocol	Function

	GET	Queries a device for more information

	SET	Makes changes to a device’s state

	GET-Next	After an initial GET query, goes to the next value

	GET-Bulk	Retrieves tables of information and security functions

	TRAP	Notifies a system administrator of a significant event

52

Chapter 5

Image 52

Digi Digi CM manual Configuring Smtp Alerts, Snmp Information, Protocol Function

Contents

Digi CM Page Page Page Installing and Configuring PC Cards Chapter Configuring PortsChapter Introduction Chapter Getting Started User Administration Configuring Security and AuthenticationCustom and Default Menus Configuring Remote Dial-In Access Power Controller System AdministrationCommand Line Interface Configuration Menu Chapter Certifications Chapter Hardware InformationIndex 155 Feature Overview Feature SummaryT r o d u c t i o n Digi CM Model Support Feature Summary Group Access Privileges Configuration Defaults Root and Admin Usernames and PasswordsUser Name Default Password Adding Port Administrators and Users Ways to Configure the Digi CM Web Interface Access Menu Ways of Accessing the Digi CM OverviewClick Serial port Connection Page Access Permissions Procedure Port Access MenuDirect Port Access Custom Menus Port Escape Menu Click Serial port Connection Description of Fields Saving and Applying Changes Automatic Device RecognitionPage Assigning IP Settings from the Console Port T t i n g S t a r t e d Configuring Http and Https Configuring for SSH Under Serial port Configuration Click Host mode configuration Adding, Editing, and Removing Users About Shell Options Compatible PC Cards Install i n g a n d C o n f i g u r i n g P C C a r d sAdding a Compact-flash Card Adding a Network Card Adding a Wireless LAN Card Adding a Serial Modem Page Adding a Serial Modem Chapter S t e m a n d P o r t L o g g i n g Enabling Log Storage Location Under the Network heading, click Syslog server configuration Enable a Compact-flash Card Configuring System Logging Under System status & log, click System logging Viewing System Logs Configure Port Logging System and Port Logging Click Save & apply Chapter Viewing Port Logs N f i g u r i n g P o r t s Enabling and Disabling the Ports Resetting Ports Click Serial port Configuration Port numberConfiguring Automatic Device Recognition Port Title ESC Apply all Ports Settings Host Mode Configuration Terminal Server Mode Dial-In Modem Mode Configuring Host Mode Supported Protocols Serial Port Parameters Serial Port Parameters Chapter E r t s a n d N o t i f i c a t i o n s Snmp Information Configuring Smtp AlertsProtocol Function Traps Configuring Snmp Managing the Snmp Protocol Configuring Port Event Handling Choose Serial port ConfigurationPage Email Alert Config Alerts for Automatic Device Recognition ADRSmtp Notification User Administration Administering Users Click Apply changes User Fields Configuring Network IP Filtering Specified host range Input format Page Configuring User Access Control Page Sniff Session Authentication Configuring Authentication Methods for Port Access Configuring Authentication for the Web Server System administration Users administration Add Making Custom Menus Custom Menu Configuration Adding Menu Items Default Menu Page Default Menu Chapter C r o s o f t S a C S u p p o r t About Digi CM Support for Microsoft Windows Server Setting Up the Windows Server 2003 Port Set Up OverviewSetting Up the Digi CM for SAC Support Page Choose Serial port Connection Field Description Page Set up C k a b l e S y s t e m s M a n a g e m e n t C a r d Set up Click Save & apply Control Set up Configuring For Dial-In Modem Access N f i g u r i n g R e m o t e D i a l I n a c c e s s Chapter Page Configuring For Dial-In Terminal Server Access Adding a PC ModemPage Configuring For Dial-In Terminal Server Access W e r C o n t r o l l e r Configuring Power Controller Installing Power ControllerClick Serial port Configuration Click Power Controller Configuration Setting Alarms and Thresholds Outlet Configuration From Power controller, click Outlets User Access for Power Controller Configuring to Restrict Specific Users Power Controller Management Under Power Control click ManagementPage Cascading Multiple Digi RPM Units 101 102 R t C l u s t e r i n g Configuring Port Clustering 105 Configuring Slave Ports on the Master Unit Manually 107 108 Telnet to the IP and the port number of the device Configuring Port Clustering Login and enter your password System Administration Upgrading the Firmware Configuration Management Click System administration Firmware upgrade Example 1,cm48.img,DigiCM48,v1.6.0 Resetting Factory Defaults Factory reset button System administration Configuration management Setting Date and Time System administration Date and timeConfiguring a Host Name System administration Device name Linux Commands M m a n d L i n e I n t e r f a c e Shell and Shell Utilities File and Disk UtilitiesSystem Utilities Network Utilities Config Files Example Scripts After editing /etc/services copy it to /usr2 Example userdelusername Configuring Accessing the Configuration MenuN f i g u r a t i o n M e n u Adding and Configuring a PC Card 125 Port Parameters System Logging Configuring Smtp Network IP Filtering Port IP Filtering Sniff Sessions Viewing a Sniff Session Field Descriptions for Sniff Sessions Dial-in Modem Access Dial-in Terminal Server Access Clustering Firmware Upgrade Restoring Factory Defaults Accessing the Boot Loader Program Hardware Test Menu 139 140 Hardware Specifications R d w a r e I n f o r m a t i o n Attribute Value Digi CM 16 and Digi CM LED Indicators About Serial Port CablingSerial Port Pinouts Pin Description RJ-45 Signal DB-25M Cable Adapters RJ-45 Signal DB-9F DB-25 Female Console Adapter DB-25 Male Modem Adapter Digi 8-pack reorder P/N RJ-45 Signal DB-9M Ethernet Pinouts Rack Mounting Installation 150 Safety R t i f i c a t i o n s Safety Immunity EmissionsSolaris Ready 154 D e Ldap 157 Index PN1P 90000301 E