Installing and Configuring PC Cards
4. Enter the appropriate parameters in the configuration menu.
5.Click Save & apply.
Note: If DHCP is active the IP address will appear after the configuration is saved and applied.
Adding a Wireless LAN Card
To install and configure a wireless LAN card on the Digi CM, do the following.
1.Insert the card into the PC slot.
2.Access the web interface.
3.Under the PC card heading, click Configuration.
Note: The card is automatically discovered and a configuration menu is displayed.
4.Click Configure the detected card.
5.Enter the appropriate parameters in the configuration menu.
WEP is the acronym for Wired Equivalent Privacy and is a security protocol for wireless LANs using encryption to protect data transfers. If you are unsure of the settings for the wireless card, see your network administrator.
Chapter 3 | 29 |
