Digi Digi CM manual Configuring Host Mode

Configuring Ports

Configuring Host Mode

To configure a serial port for host mode, enter the values in the applicable fields. To access the Host mode configuration screen, do the following:

1.Access the web interface.

2.Under the Serial Port heading, click Configuration.

3.Choose All or an Individual port > Host mode configuration.

4.Fill in the highlighted fields as they apply to your configuration.

Host mode - The options are console server mode, terminal server mode, dial-in modem mode, and dial-in terminal server mode.

Type of console server - The options are MS SAC console -English or Japanese which you use to provide a graphic user interface to the Windows Server 2003 Special Administration Console (see "Microsoft SAC Support" on page 75) and Other, which you use in all other cases.

Rackable Systems Mgmt Card - Enable to use Rackable’s Management card. Enable/Disable assigned IP - Determines whether an IP address will be

Chapter 4 47