Power Controller
2. Click either the Port # or the power controller title.
The Power controller statistics screen appears to show the Alarm threshold, Current temp, Circuit breaker condition, RMS voltage, RMS current, and Max current detected.
The Clear button will reset the Max current detected to 0.0 amps. From this screen click Outlets.
3. Select the outlet number that you would like to manage.
Note: The screen below shows that all the outlets are powered On and outlet 3 is Rebooting, therefore the Backup Tape Device is power cycling.
4. Click Power on, Power off, or Reboot depending on what you want the outlet to do.
Chapter 12 | 99 |
