Configuration Menu
Restoring Factory Defaults
You have two choices to restore the unit to its factory defaults. The options are restoring all factory defaults or restoring all factory defaults except IP settings. To restore your unit to the factory defaults, do the following:
1.Access the configuration menu.
2.Choose System administration.
3.Select Configuration import.
4.Select Location
5. Select Factory Default.
The system will restore factory defaults, and the unit will automatically reboot.
Note: Use System Administration to save your configuration in case you need to reload it later or onto another system. See "Adding and Configuring a PC Card" on page 124 for more information.
Setting Date and Time
Date and time on the Digi CM can either be kept internally or by an NTP server. To set the parameters for date and time on the Digi CM, do the following:
1.Access the configuration menu.
2.Choose System administration.
3.Choose Date and Time.
4.Enter the desired parameters.
5.Choose Save changes.
Accessing the Boot Loader Program
The Boot Loader program can be accessed during the boot process. The main function of the program is to provide a backup means for restoring the
Chapter 16 | 137 |
