Digi Digi CM manual Terminal Server Mode

Configuring Ports

CM that listens for a Telnet or SSH client connection. When you connect to the TCP socket, you have access to the device attached to the serial port as though the device were connected directly to the network. RawTCP is also supported with the Console Server Mode.

Connection request

serial

Terminal Server Mode

In terminal server mode, the Digi CM serial port is configured to wait for data from the device connected to the port. If data is detected, the Digi CM starts a TCP session as a Telnet or SSH client to a pre-defined server. The server must be defined by you before the port can be configured for a Telnet or SSH client. This mode is used when you want to access servers on the network from a serial terminal. RawTCP is also supported with the Terminal Server Mode.

Connection request

terminals

serial

Chapter 4 45