HP CP4025DN Laser CC490A manual Adjust Paper, Print Mode, Types, Resistance, Restore Optimize

Item	Sub-item	Sub-item	Values	Description
ADJUST PAPER	A list of paper types	PRINT MODE	A list of print modes	Configure the print mode that is associated
TYPES	displays.	RESISTANCE	displays.	with each media type.
		MODE
		HUMIDITY MODE
		PRE-ROTATION
		MODE
		FUSER TEMP
		MODE
		PAPER CURL
		MODE
	RESTORE MODES			Use this feature to return all paper type-
				mode settings to the factory-default settings.
OPTIMIZE	A list of available			Allows you to optimize various print modes
	options displays.			to address print quality issues.
	RESTORE OPTIMIZE			Use this feature to return all the settings in
				the OPTIMIZE menu to the factory-default
				values.
QUICK CALIBRATE				Performs a partial product calibration.
NOW
FULL CALIBRATE				Performs all product calibrations.
NOW
DELAY			NO	This menu controls the timing of the
CALIBRATION AT			YES*	calibration when the product wakes up or is
WAKE/POWER-ON				turned on.
				● Select NO to have the product calibrate
				immediately when it wakes up or is
				turned on. The product will not print any
				jobs until it finishes calibrating.
				● Select YES to enable a product that is
				asleep to accept print jobs before it
				calibrates. It may start calibrating
				before it has printed all the jobs it has
				received. This option allows quicker
				printing when coming out of sleep
				mode or when you turn the product on,
				but print quality might be reduced.
				NOTE: For best results, allow the product
				to calibrate before printing. Print jobs
				performed before calibration might not be of
				the highest quality.
RESOLUTION			Image REt 3600*	Sets the resolution at which the product
			1200x1200 dpi	prints. The default value is Image REt
				3600. Try the 1200x1200 dpi setting to
				improve printing for detailed line work or
				small text.

ENWW Control panel menus 25