![](/images/backgrounds/292484/hp-hp-laserjet-cp4025dn-laser-printer-cc490a-users-manual-545063184x1.png)
4.Unscrew the thumb screws and then pull the formatter board from the product. Place the formatter board on a clean, flat, grounded surface.
5.To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM slot, lift the DIMM up at an angle, and pull it out.
OXOXO
X
OXO |
| |
XOX | OXO | XO |
| XO | |
XOX | XO |
XOOOXXXOXO
XOXOXOO
XOX
XOOOXOXX
XO
XOXOO
OXXXO
XOXOXO |
|
XOXOXO |
|
XOXOXO | XOXOXOXOXOXO |
XOXOXO | |
XOXOXOXO | XOXOXOXOXOXO |
OXOXOX | XOXOXO | XOXO |
XOXOXO | XOXOXO | |
| XOXOXO | |
XOXOXO XOXOXO |
|
6.Remove the new DIMM from the antistatic package. Locate the alignment notch on the bottom edge of the DIMM.
170 Chapter 9 Manage and maintain | ENWW |