HP CP4025DN Laser CC490A Default Paper Size, Default Custom Paper Unit of Measure, Size Dimension

Menu item	Sub-menu item		Values	Description
COPIES			Range: 1 - 32000	Allows you to set the default
				number of copies for print jobs.
				The default number is 1.
DEFAULT PAPER SIZE			A list of available sizes	Allows you to set the default
			appears. See Supported	paper size.
			paper sizes on page 83.
DEFAULT CUSTOM PAPER	●	UNIT OF MEASURE		Allows you to set the default size
SIZE	●	X DIMENSION		for any custom print job that
				does not specify the dimensions.
	●	Y DIMENSION		The default unit of measure is
				MILLIMETERS.
DUPLEX			OFF*	Allows you to enable or disable
			ON	two-sided printing.
				NOTE: This menu is available
				only on models that have
				automatic duplexing.
DUPLEX BINDING			LONG EDGE*	Allows you to change the binding

edge for two-sided printing.

SHORT EDGE

NOTE: This menu is available only on models that have automatic duplexing.

OVERRIDE A4/LETTER	NO
	YES*

Allows you to set the product to print an A4 job on letter-size paper when no tray is configured for A4 paper, or to print on A4- size paper when no tray is configured for letter paper.

MANUAL FEED	OFF*
	ON

Setting this option to ON makes MANUAL FEED the default for jobs that do not select a tray. The Autoselect option in the printer driver overrides this option.

COURIER FONT	REGULAR*	Allows you to select a version of
	DARK	the Courier font.
		The DARK setting is an internal
		Courier font available on HP
		LaserJet Series III printers and
		older.

WIDE A4	NO *
	YES

Allows you to change the printable area of A4 paper. If you select NO, the printable area is seventy-eight 10-pitch characters on a single line. If you select YES, the printable area is eighty 10-pitch characters on a single line.

20 Chapter 2 Control panel menus ENWW