Table 10-1Control-panel messages (continued)

Description

Recommended action

 

 

MANUALLY FEED OUTPUT STACK Then press OK to print second side

The product has printed the first side of a manual duplex job and is waiting for the user to insert the output stack to print the second side.

1.Maintaining the same orientation, remove document from the output bin.

2.Flip document printed side up.

3.Load document in Tray 1.

4.Press the OK button to print.

MOVING SOLENOID

The solenoid is moving as part of a

No action is necessary.

To exit press

component test.

 

 

 

 

 

 

MOVING SOLENOID AND MOTOR

The solenoid and a motor are moving as part

No action is necessary.

To exit press

of a component test.

 

 

 

 

 

 

No job to cancel

You have pressed the stop button but the

No action is necessary.

product is not actively processing any jobs.

NO STORED JOBS

Displayed when the user enters the

No action is necessary.

 

RETRIEVE JOB menu and there are no jobs

 

 

to retrieve.

 

NON HP SUPPLY INSTALLED

The product is using a non-HP supply. This

 

message appears for six seconds after you

 

install a non-HP supply.

If you believe you purchased a genuine HP supply, go to www.hp.com/go/ anticounterfeit. Any product repair required as a result of using non-HP or unauthorized supplies is not covered under warranty. HP cannot ensure the accuracy or the availability of certain features.

Paused

The product is paused, and there are no error

Press the stop button .

To return to Ready press

messages pending at the display. The I/O

 

continues receiving data until memory is full.

 

 

 

 

Performing upgrade

The product is in the process of upgrading the

Please wait until the upgrade is complete.

<X:YYY> % complete

firmware.

 

 

 

Do not power off

 

 

 

 

 

Performing... COLOR BAND TEST

The color-band test is being performed.

No action is necessary.

 

 

 

Performing... PAPER PATH TEST

The product is performing a paper path test.

No action is necessary.

 

 

 

Please wait

The product is in the process of clearing data.

No action is necessary.

 

 

 

Powering off...

The product is shutting down.

Please wait until the product shuts down.

 

 

 

Printing <REPORT>

The product is printing an internal page. The

No action is necessary.

 

product will return to the online Ready state

 

 

when the page is completed.

 

 

 

 

PRINTING STOPPED

Time has expired on the Print/Stop test.

Press the OK button to continue.

To continue press OK

 

 

Processing duplex job

Paper temporarily comes into the output bin

Do not grab paper until job completes

while printing a duplex job. Do not attempt to

remove the pages until the job is complete.

Do not grab paper as it temporarily comes into the output bin. The message will disappear when the job is finished.

196 Chapter 10 Solve problems

ENWW