Table 2-1Embedded Jetdirect menu (continued)

Item

Sub-item

Sub-item

Sub-item

Description

 

 

 

 

 

 

IPSEC

 

KEEP

Specify the IPSec status on the print server.

 

 

 

DISABLE*

KEEP: IPSec status remains the same as

 

 

 

 

currently configured.

 

 

 

 

DISABLE: IPSec operation on the print

 

 

 

 

server is disabled.

 

 

 

 

 

 

802.1X

 

RESET

Specify whether the 802.1X settings on the

 

 

 

KEEP*

print server are reset to the factory defaults.

 

 

 

RESET: The 802.1X settings are reset to the

 

 

 

 

 

 

 

 

factory defaults.

 

 

 

 

KEEP: The current 802.1X settings are

 

 

 

 

maintained.

 

 

 

 

 

 

RESET SECURITY

 

YES

Specify whether the current security settings

 

 

 

NO*

on the print server will be saved or reset to

 

 

 

factory defaults.

 

 

 

 

YES: Security settings are reset to factory

 

 

 

 

defaults.

 

 

 

 

NO: The current security settings are

 

 

 

 

maintained.

 

 

 

 

 

DIAGNOSTICS

EMBEDDED TESTS

 

 

This menu provides tests to help diagnose

 

 

 

 

network hardware or TCP/IP network

 

 

 

 

connection problems.

 

 

 

 

Embedded tests help to identify whether a

 

 

 

 

network fault is internal or external to the

 

 

 

 

product. Use an embedded test to check

 

 

 

 

hardware and communication paths on the

 

 

 

 

print server. After you select and enable a test

 

 

 

 

and set the execution time, you must select

 

 

 

 

EXECUTE to initiate the test.

 

 

 

 

Depending on the execution time, a selected

 

 

 

 

test runs continuously until either the product

 

 

 

 

is turned off, or an error occurs and a

 

 

 

 

diagnostic page is printed.

 

 

 

 

 

 

 

LAN HW TEST

YES

CAUTION: Running this embedded test will

 

 

 

NO*

erase your TCP/IP configuration.

 

 

 

This test performs an internal loopback test.

 

 

 

 

 

 

 

 

An internal loopback test will send and

 

 

 

 

receive packets only on the internal network

 

 

 

 

hardware. There are no external

 

 

 

 

transmissions on your network.

 

 

 

 

Select YES to choose this test, or NO to not

 

 

 

 

choose it.

 

 

 

 

 

 

 

HTTP TEST

YES

This test checks operation of HTTP by

 

 

 

NO*

retrieving predefined pages from the product,

 

 

 

and tests the embedded Web server.

 

 

 

 

Select YES to choose this test, or NO to not

 

 

 

 

choose it.

 

 

 

 

 

36 Chapter 2 Control panel menus

ENWW