HP CP4025DN Laser CC490A Print Results YES, Ping Results, Packets Sent, Received, Percent Lost

Table 2-1Embedded Jetdirect menu (continued)

Item	Sub-item	Sub-item	Sub-item	Description
		PRINT RESULTS	YES	If the ping test was not set for continuous
			NO*	operation, you can choose to print the test
				results. Select YES to print results. If you
				select NO, results are not printed.
		EXECUTE	YES	Specify whether to initiate the ping test.
			NO*	Select YES to initiate the test, or NO to not
				run the test.
	PING RESULTS			Use this item to view the ping test status and
				results using the control panel display. You
				can select the following items:
		PACKETS SENT		Shows the number of packets (0 - 65535)
				sent to the remote host since the most recent
				test was initiated or completed. The default is
				0.
		PACKETS		Shows the number of packets (0 - 65535)
		RECEIVED		received from the remote host since the most
				recent test was initiated or completed. The
				default is 0.
		PERCENT LOST		Shows the percent (0 to 100) of ping test
				packets that were sent with no response from
				the remote host since the most recent test
				was initiated or completed. The default is 0.
		RTT MIN		Shows the minimum detected roundtrip-time
				(RTT), from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		RTT MAX		Shows the maximum detected roundtrip-time
				(RTT), from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		RTT AVERAGE		Shows the average round-trip-time (RTT),
				from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		PING IN	YES	Shows whether a ping test is in progress.
		PROGRESS	NO*	YES indicates a test in progress, and NO
				indicates that a test completed or was not run.
		REFRESH	YES	When viewing the ping test results, this item
			NO*	updates the ping test data with current
				results. Select YES to update the data, or
				NO to maintain the existing data. However, a
				refresh automatically occurs when the menu
				times out or you manually return to the main
				menu.
LINK SPEED				The link speed and communication mode of
				the print server must match the network. The
				available settings depend on the product and
				installed print server. Select one of the
				following link configuration settings:
				CAUTION: If you change the link setting,
				network communications with the print server
				and network product might be lost.

38 Chapter 2 Control panel menus ENWW