![](/images/backgrounds/292484/hp-hp-laserjet-cp4025dn-laser-printer-cc490a-users-manual-545063243x1.png)
Product software problems
Problem | Solution |
|
|
|
|
|
|
A printer driver for the product is | Reinstall the product software. |
|
|
not visible in the Printer folder | NOTE: Close any applications that are running. To close an application that has an icon in the system | ||
| |||
| tray, | ||
|
| ||
| Try plugging the USB cable into a different USB port on the computer. | ||
|
|
|
|
An error message was displayed | Reinstall the product software. |
|
|
during the software installation | NOTE: Close any applications that are running. To close an application that has an icon in the task bar, | ||
| |||
| |||
|
| ||
| Check the amount of free space on the drive where you are installing the product software. If necessary, | ||
| free up as much space as you can, and reinstall the product software. | ||
|
| ||
| If necessary, run the Disk Defragmenter, and reinstall the product software. | ||
|
| ||
The product is in Ready mode, | Print a Configuration page, and verify the product functionality. | ||
but nothing prints |
|
|
|
|
| ||
| Verify that all of the cables are correctly seated and within specifications. This includes the USB and | ||
| power cables. Try a new cable. |
|
|
|
| ||
| Verify the IP Address on the Embedded Jetdirect Page matches the IP address for the software port. | ||
| Use one of the following procedures: |
| |
|
|
|
|
| Windows XP, Windows Server | 1. | Click Start. |
| 2003, Windows Server 2008, and | 2. | Click Settings. |
| Windows Vista | ||
|
| 3. | Click Printers and Faxes (using the default Start menu view) or |
|
|
| click Printers (using the Classic Start menu view). |
|
| 4. | |
|
| 5. | Click the Ports tab, and then click Configure Port. |
|
| 6. | Verify the IP address, and then click OK or Cancel. |
|
| 7. | If the IP Addresses are not the same, delete the driver, and |
|
|
| reinstall the driver using the correct IP address. |
|
|
|
|
| Windows 7 | 1. | Click Start. |
|
| 2. | Click Devices and Printers. |
|
| 3. | |
|
|
| properties. |
|
| 4. | Click the Ports tab, and then click Configure Port. |
|
| 5. | Verify the IP address, and then click OK or Cancel. |
|
| 6. | If the IP Addresses are not the same, delete the driver, and |
|
|
| reinstall the driver using the correct IP address. |
|
|
|
|
ENWW | Product software problems 229 |