Menu item | Value | Description |
|
|
|
TRAY <X> SIZE | A list of available sizes appears. |
X = 2 or optional 3, 4, or 5
Allows you to configure the paper size for Tray 2 or optional Tray 3, 4, or 5. These trays can detect the paper size by the guides in the tray. See Supported paper sizes on page 83 for a complete list of available sizes.
TRAY <X> TYPE | A list of available types appears. |
X = 2 or optional 3, 4, or 5
Allows you to configure the paper type for Tray 2 or optional Tray 3, 4, or 5. The default is PLAIN. See Supported paper types
on page 85 for a complete list of available types.
Use this menu to configure how the product alerts you when supplies are approaching the estimated end of life.
To display: Press the Home button 
, and then select the MANAGE SUPPLIES menu.
NOTE: Values that have an asterisk (*) are the
Menu item | Values | Description | |
|
|
|
|
AT VERY LOW | BLACK CARTRIDGE | STOP |
PROMPT TO CONTINUE*
CONTINUE
Select what the product should do when the print cartridge is very near the end of its estimated life.
STOP: The product stops until you replace the cartridge.
PROMPT TO CONTINUE: The product stops until you clear the prompt message. After the prompt message is cleared, there will not be another message indicating that the supply needs to be replaced.
CONTINUE: The product provides an alert message, but it continues printing. There will not be another message indicating that the supply needs to be replaced.
16 Chapter 2 Control panel menus | ENWW |