HP CP4025DN Laser CC490A manual Check Dimm installation, Memory allocation, Print & Fax icon

Mac OS X 10.4	1.	From the Apple menu	, click the System Preferences menu and then click
		the Print & Fax icon.
	2.	Select the product in the left side of the window.
	3.	Click the Printer Setup button.
	4.	Click the Installable Options menu.
Mac OS X 10.5 and 10.6	1.	From the Apple menu	, click the System Preferences menu and then click
		the Print & Fax icon.
	2.	Select the product in the left side of the window.
	3.	Click the Options & Supplies button.
	4.	Click the Driver tab.
	5.	Configure the installed options.

Check DIMM installation

After installing the DIMM, make sure that the installation was successful.

1.Turn the product on. Check that the Ready light is illuminated after the product has gone through the startup sequence. If an error message appears, a DIMM might have been incorrectly installed. See Control-panel messages on page 183.

2.Print a configuration page (see Print information pages on page 148).

3.Check the memory section on the configuration page and compare it to the configuration page that was printed before the memory installation. If the amount of memory has not increased, the DIMM might not be installed correctly, or the DIMM might be defective. Repeat the installation procedure. If necessary, install a different DIMM.

NOTE: If you installed a product language (personality), check the "Installed Personalities and Options" section on the configuration page. This area should list the new product language.

Memory allocation

Utilities or jobs that you download to the product sometimes include resources (for example, fonts, macros, or patterns). Resources that are internally marked as permanent remain in the product memory until you turn the product off.

Use the following guidelines if you use the page description language (PDL) ability to mark resources as permanent. For technical details, see an appropriate PDL reference for PCL or PS.

●Mark resources as permanent only when it is absolutely necessary that they remain in memory while the product is turned on.

●Send permanent resources to the product only at the beginning of a print job and not while the product is printing.

NOTE: Overusing permanent resources or downloading them while the product is printing might affect product performance or the ability to print complex pages.

ENWW Replacement instructions 173