Table 10-1Control-panel messages (continued)

Description

Recommended action

 

 

 

 

 

 

USB ACCESSORY NOT FUNCTIONAL

A USB accessory is not working correctly.

1.

Turn product off.

 

 

2.

Disconnect the USB accessory, and

 

 

 

replace with a new USB accessory.

 

 

 

USB ACCESSORY UNAVAILABLE

The USB accessory is currently unavailable.

To use the USB accessory, install the

To clear press OK

 

software for the USB accessory and turn the

 

product off. Then, turn the product on with the

 

 

accessory attached.

 

 

 

USB STORAGE DEVICE FAILURE

The specified device has failed.

Press the OK button to clear.

To clear press OK

 

 

 

USB STORAGE FILE OPERATION FAILED To clear press OK

A PJL file system command attempted to perform an illogical operation.

Press the OK button to clear.

USB STORAGE FILE SYSTEM IS FULL

A PJL file system command could not store

Press the OK button to clear.

To clear press OK

something on the file system because the file

 

system was full.

 

 

 

 

USB STORAGE IS WRITE PROTECTED

The file system device is protected and no

Press the OK button to clear.

To clear press OK

new files can be written to it.

 

 

 

 

 

 

USB STORAGE NOT INITIALIZED

This file-storage component must be

Use the embedded Web server or HP Web

 

initialized before use.

Jetadmin to initialize the component.

 

 

 

USED SUPPLY IN USE

The print cartridge has been previously used.

If you believe you purchased a genuine HP

 

 

supply, go to www.hp.com/go/

 

 

anticounterfeit.

 

 

 

WAIT FOR PRINTER TO REINITIALIZE

This message can appear for a variety of

No action is necessary.

 

reasons:

 

 

The RAM DISK settings changed before

 

 

the product has restarted.

 

 

The product is restarting after changing

 

 

external device modes.

 

 

Diagnostics has been exited.

 

 

A new formatter has been installed with

 

 

an old engine or a new engine has been

 

 

installed with an old formatter.

 

 

 

 

WAITING FOR TRAY <X> TO LIFT

The specified tray is lifting paper for feeding.

No action is necessary.

 

 

 

WARMING UP

The product is coming out of Sleep mode.

No action is necessary.

WRONG CARTRIDGE IN <COLOR> SLOT The indicated slot for a print cartridge contains a cartridge that is not the correct color. From left to right, the print cartridges should be installed in this order:

Remove the print cartridge from that slot, and install a cartridge that is the correct color.

Yellow

Magenta

Cyan

Black

204 Chapter 10 Solve problems

ENWW