HP CP4025DN Laser CC490A manual Push down on the Dimm until both latches engage the Dimm

7.Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the metal contacts are not visible.

OXOXO

X

	XO
XO
XO	OXO	XO
		XO
	XOX	XO

XOOOXX

XOXO

XOXOXOO

XOX

XOOOXOXX

XO

XOXOO

OXXXO

XOXOXO
XOXOXO
XOXOXO
XOXOXO	XOXOXOXOXOXO
XOXOXOXO	XOXOXOXOXOXO

OXOXOX	XOXOXO	XOXO
	XOXOXO	XOXOXO
	XOXOXO
XOXOXO XOXOXO

8.Push down on the DIMM until both latches engage the DIMM.

						XIO
				XIO		O
				XIO
				XIO	O	OXIXO
				XIO
	XIO				XIX
	XIO
	XIO	XIOXIX	O		OXIXO
XOXO
XO
			O	O
				XIX
XIXO
OXIX	O

	OXO
OX	XO
X		XOXO
	O
	XOX	XO

XOXOXO

XOXOXO

XOXOXO

XOXOXO

XOXOXOXO

XOXOXO	XOXOXO
	XOXOXO
	XOXOXO
XOXOXO XOXOXO

XOXOXOXOXOXO XOXOXOXOXOXO

XOXO

XOXOXO

NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the correct type of DIMM.

9.Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into the product.

NOTE: To prevent damage to the formatter board, ensure the formatter board is aligned in the tracks at the top and the bottom of the opening.

ENWW Replacement instructions 171