HP CP4025DN Laser CC490A manual 45

Item	Sub-item	Values	Description
AUTO CONTINUE		OFF	Determines product behavior
		ON*	when the system generates an
			Auto Continuable error.
			● ON: Allows the product to
			continue printing.
			● OFF: Stops the product from
			printing until the error is
			cleared by the user.
JAM RECOVERY		AUTO*	Sets whether the product will
		OFF	attempt to reprint pages after a
			jam. If you select AUTO, the
		ON	product reprints pages if enough
			memory is available for full-speed
			two-sided printing.
RAM DISK		AUTO*	Sets how the RAM disk feature is
		OFF	configured. This is only available if
			there is no hard disk installed and
			the printer has at least 8 MB of
			memory.
			If the AUTO setting is enabled, the
			product determines the optimal
			RAM disk size based on the
			amount of available memory.
			If the OFF setting is enabled, the
			RAM disk is disabled, but a
			minimal RAM disk is still active.
LANGUAGE		A listing of available languages	Sets the language. The default
		appears.	language is ENGLISH.

ENWW Control panel menus 31