HP CP4025DN Laser CC490A manual 55

Item	Sub-item	Values	Description
PAPER PATH SENSORS			Performs a test on each of the
			product’s sensors to determine if
			they are working correctly and
			displays the status of each sensor.
PAPER PATH TEST			Tests the paper-handling features
			of the product, such as the
			configuration of the trays.
	PRINT TEST PAGE		Generates a page for testing the
			paper-handling features. You must
			define the path for the test in order
			to test specific paper paths.
	SOURCE	ALL TRAYS	Specifies whether the test page is
		TRAY 1	printed from all trays or from a
			specific tray.
		TRAY 2*
		TRAY 3
		TRAY 4
		TRAY 5
	DUPLEX	OFF	Determines whether the duplexer
		ON	is included in the test.
			NOTE: This option is available
			only for models that have an
			automatic duplexer.

COPIES	1*
	10

50

100

500

Determines how many pages should be sent from the specified source as part of the test.

MANUAL SENSOR TEST		Performs tests to determine
		whether the paper path sensors are
		operating correctly.
MANUAL SENSOR TEST		Performs additional tests to
2		determine whether the paper path
		sensors are operating correctly.
COMPONENT TEST	A list of available components	Activate individual parts
	appears.	independently to isolate noise,
		leaking, and other hardware
		issues.
PRINT/STOP TEST	Range is 0 - 60,000 milliseconds.	Isolates print quality faults more
	The default is 0.	accurately by stopping the product
		in mid-print cycle, which allows you
		to see where the image begins to
		degrade. This causes a jam
		message that might need to be
		manually cleared. A service
		representative should perform this
		test.

ENWW Control panel menus 41