Table 10-1Control-panel messages (continued)

Description

Recommended action

 

 

 

 

 

REMOVE SHIPPING SHEET

The transfer unit shipping sheet was not

1. Open the right door.

 

removed before you turned the product on.

2.

Remove the shipping sheet.

 

 

 

 

3.

Close the right door.

 

 

 

REPLACE <COLOR> CARTRIDGE

The product indicates when a supply level is

Replace the specified color cartridge. See

 

at its estimated end of life. The actual life

Replace print cartridges on page 164.

 

remaining might be different than the

Or, configure the product to continue printing

 

estimation. Have a replacement supply

 

available to install when print quality is no

by using the MANAGE SUPPLIES menu. For

 

longer acceptable. The supply does not need

more information about the MANAGE

 

to be replaced now unless the print quality is

SUPPLIES menu, see Manage supplies

 

no longer acceptable. After an HP supply has

menu on page 16.

 

reached its approximated end of life, HP’s

 

 

 

premium Protection Warranty on that supply

 

 

 

ends.

 

 

REPLACE FUSER KIT

The product indicates when the fuser kit is at

 

its estimated end of life. The actual life

 

remaining might be different than the

 

estimation. Have a replacement fuser kit

 

available to install when print quality is no

 

longer acceptable. The fuser kit does not

 

need to be replaced now unless the print

 

quality is no longer acceptable. After the fuser

 

kit reaches its approximated end of life, HP’s

 

premium Protection Warranty on that fuser kit

 

ends.

CAUTION: The fuser can be hot while the product is in use. Wait for the fuser to cool before handling it.

1.Open the right door.

2.Grasp the blue handles on both sides of the fuser and pull straight out to remove it.

3.Install the new fuser.

4.Close the right door.

REPLACE SUPPLIES For status press OK

Two or more supplies are at the estimated end of life. The actual life remaining might be different than the estimation. Have a replacement supply available to install when print quality is no longer acceptable. The supply does not need to be replaced now unless the print quality is no longer acceptable. After an HP supply has reached its approximated end of life, HP’s premium Protection Warranty on that supply ends.

Press the OK button to see which supplies need to be replaced.

Or, configure the product to continue printing by using the MANAGE SUPPLIES menu. For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 16.

REPLACE SUPPLIES - Using black only

You can configure the product to print using

 

only black when the level of a color supply

 

has reached its estimated end of life.

 

However, the color supply might still be able

 

to produce acceptable print quality.

 

The supply life remaining is used to

 

determine if a supply is very low. The supply

 

life remaining is an approximation only and

 

varies depending on the types of documents

 

printed and other factors.

No user input is required for printing to continue in black. To continue printing in color, either replace the supply or reconfigure the product by using the MANAGE SUPPLIES menu on the control panel.

For more information about ordering supplies, see Supplies and accessories on page 235.

For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 16.

198 Chapter 10 Solve problems

ENWW