HP CP4025DN Laser CC490A manual Print Quality menu

Print Quality menu

To display: Press the Home button , select the CONFIGURE DEVICE menu, and then select the PRINT QUALITY menu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Item	Sub-item	Sub-item	Values	Description
ADJUST COLOR	HIGHLIGHTS	CYAN DENSITY	Range from +5 to	Adjust the darkness or lightness of highlights
		MAGENTA	–5. Default is 0.	on a printed page. Lower values represent
				lighter highlights on a printed page, and
		DENSITY		higher values represent darker highlights on
		YELLOW DENSITY		a printed page.
		BLACK DENSITY
	MIDTONES	CYAN DENSITY	Range from +5 to	Adjust the darkness or lightness of midtones
		MAGENTA	–5. Default is 0.	on a printed page. Lower values represent
				lighter midtones on a printed page, and
		DENSITY		higher values represent darker midtones on
		YELLOW DENSITY		a printed page.
		BLACK DENSITY
	SHADOWS	CYAN DENSITY	Range from +5 to	Adjust the darkness or lightness of shadows
		MAGENTA	–5. Default is 0.	on a printed page. Lower values represent
				lighter shadows on a printed page, and
		DENSITY		higher values represent darker shadows on
		YELLOW DENSITY		a printed page.
		BLACK DENSITY
	RESTORE COLOR			Restore the color settings by resetting the
	VALUES			density values of each color.
SET REGISTRATION				For each tray, setting the registration shifts
				the margin alignment to center the image on
				the page from top to bottom and from left to
				right. You can also align the image on the
				front with the image printed on the back.
	ADJUST TRAY <X>			Perform the alignment procedure for each
				tray.
				When it creates an image, the product scans
				across the page from side to side as the
				sheet feeds from top to bottom into the
				product.
		PRINT TEST PAGE		Print a test page and instructions for setting
				the registration of the image location.

ENWW Control panel menus 23