Digi Digi CM manual Traps

Alerts and Notifications

Traps

There are additional traps that can be set at the port level. The following table shows where the trap is under Serial port > Configuration on the web interface, trap name, configure options, and the trap functions. The MIBs for login traps can be found at http://ftp.digi.com/support/utilities/digicm/

Trap Location	Trap Name	Function
		Notify about any login
Port access menu	Port login trap	action to the port
		access menu
		(succeed and fail)
		Notify about login to
		this specific port
Alert configuration	Port login trap	(succeed and fail)
		(only available if host
		mode is set to
		"Console server")
		Notify about a change
Alert configuration	Device	of the DTR signal line
		(only available if host
	connection trap
		mode is set to
		"Console server")
		Notify about changes
		in the device’s
		response to the probe
	Active detection	string (see also
Alert configuration		"Automatic Device
	trap
		Recognition" on page
		19, only available if
		host mode is set to
		"Console server")
		Notify about modem
	Dial-in modem	test (succeed and fail)
Alert configuration		(only available if host
	test trap
		mode is set to "Dial-in
		modem")
		Notify about the
		occurrence of a
	Keyword	keyword in the port
Port event handling		log
	notification trap
		(only available if host
		mode is set to
		"Console server")

Chapter 5 53