Lexicon MPX G2 manual The Rear Panel

MPX G2 User Guide Lexicon

The Rear Panel

MIDI

IN

7-pin DIN connector for MIDI IN or powered bidirectional MIDI remote.

THRU

5-pin DIN connector passes any MIDI data received without change.

OUT

5-pin DIN connector transmits MIDI data to other equipment.

Insert Returns (from Preamp) When connected, external audio will be inserted after the Gain block.

	Insert Send (to Preamp)
Insert Returns Level	When the Insert Returns
Controls the input level	are connected, all effects
of the Insert Returns.	before (and including) the
	Gain block will be passed
	to this connector.

Guitar Input

Guitar input (overridden by front panel input.)

REMOTE POWER IN

2.5mm connector for 9 VAC MIDI remote power.

AC Power

Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range.

Foot Pedal	Phones
1/4" Tip/Ring/Sleeve	Headphone input.
phone jack provided for
footpedal with 10kΩ to
100kΩ impedance.

Foot Switch

1/4" Tip/Ring/Sleeve phone jack for three independent footswitches.

Main Outputs (to Power Amp or Console)

XLR and 1/4" TRS: Output impedance is 600Ω, each side, balanced, and levels up to +18dBu maximum full scale.

Unbalanced output levels up to +21dBu into 100kΩ.

For control voltage input, use a 1/4" stereo plug with Sleeve connected to ground, Tip connected to the control voltage, and Ring unconnected.

1-2