Lexicon MPX G2 manual SysEx, Soft Thru Dump, Options: Automation Xmit ID, Options: Xmit Speed

This control is provided for recording changes in a sequence, or for control of one or more additional MPX G2s. Select On to have values resulting from front panel operations sent out as System Exclusive messages.

Options: Automation Xmit ID

Press Options to access the Automation Xmit ID screen where you can select 0-126to identify the target MPX G2s.

System Controls

Automation

Press Options to access Automation

Xmit ID selection. Press Options again to exit.

This control is provided for communication with one or more additional MPX G2s, or computer editor software. On (the default setting) allows System Exclusive messages to be received by the MPX G2.

Options: SysEx Receive Device ID

Press Options to access the SysEx Receive Device ID screen where you can select 0-126or All to identify the MPX G2.

Setting this parameter to On will merge data (Program Change, Continuous Controllers and Note messages) received via the MPX G2 MIDI IN port with the messages transmitted through the MIDI OUT port. The default for this parameter is Off.

This control allows you to perform MIDI dumps of Current Pgm, All Programs, Map 1-3, Chain 1-10, Setup 1-5. Select whichever of these categories you want, and press Store.

Options: Xmit Speed

Press Options to select one of four MIDI transmission speeds (Slow, Medium Slow, Medium Fast and Fast.)

NOTE: The Device ID used in dumps is the current Receive Device ID.

SysEx

Press Options to ac- cess SysEx Receive

Device ID selection. Press Options again to exit.

Soft Thru

Dump

Press Options to select MIDI transmit speed. Press Options

again to exit.

5-9