-240, Hardware error; Rear panel HP-IB switch -224, Illegal parameter value
-222, Data out of range;Expected O-l -222, Data out of range
-221, Settings conflict
-221, Settings conflict;List Arrays Invalid
-221, Settings conflict;Power And Level Mode -221, Settings conflict;Power and attenuator -221, Settings conflict;mm Module Mismatch -220, Parameter error;Value not allowed -213, Init ignored
-200, Execution error;No more room in EEROM -200, Execution error;Option Not Installed
Error Messages From - 199 to - 100
These error messages indicate that a SCPI syntax error has been detected by the synthesizer’s parser. An error of this type sets the Command Error Bit (bit 5) in the Event Status Register. One of the following events has occurred:
nA syntax error has been detected. Possible errors are: a data element that violates the device listening formats or whose type is unacceptable to the instrument.
w A semantic error has been detected indicating that an unrecognized header was received.
nA Group Execute Trigger (GET) was entered into the input buffer inside a SCPI program message.
Events that generate Command Errors do not generate Execution Errors, Device-specific Errors, or Query Errors.
-178, Expression data not allowed
-170, Expression error;Bad terminator
-161, Invalid block data;Bad terminator -160, Block data error
-160, Block data error;Bad block type
-151, Invalid string data;Bad terminator -144, Character data too long;>12 chars -141, Invalid character data;Bad char in token -138, Suffix not allowed
-131, Invalid suffix;This one not allowed
-123, Exponent too 1arge;Decimal number -123, Exponent too 1arge;Numeric overflow -122, RESERVED
-121, Invalid character in number
-120, Numeric data error;Bad format
-120, Numeric data error;Bad terminator
-113, Undefined Header;Query not allowed -113, Undefined header;Bad mnemonic -109, Missing parameter
-108, Parameter not allowed;Too many
Error Messages 2a-7
