HP 8360 manual Module Menu, Function Group ALC Menu Map

Module Menu

Function Group (ALC)

Menu Map 1

Description This softkey accesses the source module selection softkeys. Millimeter-wave source modules can be connected to the synthesizer source module interface connectors (there is one each on the front and rear panels). These softkeys give you the option of letting the synthesizer automatically look at both connectors for source modules or telling the synthesizer to look only at the front or at the rear connector. You can also turn off module sensing completely.

Module Select AUTO

M o d u l e Select Front

Sets the synthesizer to automatic selection of the source module (selects the front connector if source modules are present at both front and rear connectors). This is the default after preset.

Sets the synthesizer to select the source module connected to the front panel source module interface connector.

Module Select RearSets the synthesizer to select the source module connected to the rear panel source module interface connector.

Module Select NoneDisables source module sensing.

Programming Codes SCPI: NONE

Analyzer: NONE

See Also Softkeys listed above.

HP 8360	Operating and Programming Reference M-23
User’s Handbook