HP 8360 Extrnl, Intrnl, Pulse h/Off, Pulse On/Off, LMOD), Menu Map, See Also, Menu Map, Description, Description, Function Group, Function Group, Programming Codes

Pulse h/OffExtrnl

Function Group

Menu Map

Description

LMOD)

4

This softkey activates the pulse modulation mode for an external pulse source. The pulse source is connected to the PULSE INPUT BNC connector and fed to the pulse modulator through a buffer circuit.

When pulse modulation is in effect, the RF output is turned on (programmed power is produced) and off (>80 dB attenuation) at a rate determined by the pulse modulation input. Pulse and amplitude modulation can be in effect simultaneously. An asterisk next to the key label indicates that this feature is active.

Programming Codes

See Also

SCPI:

PULSe:SOURce EXTernal

PULSe[:STATe] ON]OFF]l]O

Analyzer: PM1 function on, PM0 function off.

(ALC), CONNECTORS, Il\rloD), Pulse Menu

Pulse On/OffIntrnl

Function Group

Menu Map

Description

4

This softkey activates pulse modulation mode using the internal pulse generator. No external connection is needed. When internal pulse modulation is selected the PULSE INPUT BNC becomes an output for the internally generated signal. An asterisk next to the softkey label indicates that this feature is active. The pulse parameters (width, period, rate, rise time, etc.) are controlled by softkeys. See Pulse Menu (or Inteknal Menu for synthesizers with Option 002) for a list of these softkeys.

P-16 Operating and Programming Reference	HP 8360
	User’s Handbook