HP 8360 manual Leveling Point Module, Leveling Point PwrMtr, ALC, Connectors

Leveling Point Module

Function Group

Menu Map

Description

Programming Codes

See Also

ALC

1

This softkey lets you set the synthesizer to level at the output of an HP 8355X series millimeter-wave source module. All models of the HP 8360 series synthesized sweepers drive mm-wave source modules. High power models of HP 8360 drive the mm-wave source modules directly and to specified power levels. An HP 8349B power amplifier is needed in other configurations. The source module interface multi-pin connector provides the communication path between the synthesizer and mm-wave source module. An asterisk next to the key label indicates that this feature is active.

SCPI: POWer:ALC[:SOURce] MMHead

Analyzer: SHA2

(ALC), CONNECTORS

“Externally Leveling the Synthesizer,” in Chapter 1.

Leveling Point

PwrMtr

Function Group

Menu Map

Description

ALC

1

This softkey lets you set the synthesizer to level at the power sensor of an external power meter. This mode of operation requires a feedback connection from the power meter to the EXT ALC BNC located on the synthesizer. An asterisk next to the key label indicates that this feature is active.

Programming Codes

See Also

SCPI: POWer:ALC[:SOURce] PMETer

Analyzer: A3

(ALC), CONNECTORS

“Externally Leveling the Synthesizer,” in Chapter 1.

L-4 Operating and Programming Reference	HP 8360
User’s	Handbook