HP 8360 manual Global Duel1

List Menu

Enter List Power Allows the entry of an ALC output power correction value for a frequency in the frequency list.

	Global Duel1	Automatically sets the dwell time for all points
		in the frequency list to a user-specified value.
	Global Offset	Automatically sets the ALC output power
		correction value for all points in the frequency
		list to a user-specified value.
	Pt Trig Menu	Reveals the frequency list in the point trigger
		menu.
	A frequency list consists of two or more frequency points. A
	frequency point can be any frequency value within the specified
	frequency range of the synthesizer and must be entered before a value
	for either ALC output power offset or dwell time is accepted. The
	maximum number of frequency points in a frequency list is 801.
	Creating a Frequency List
	There are two methods of constructing a frequency list:
	1. Use the Enter List Freq softkey to begin entering frequency
	points. The list will be generated in the order the values are
	entered.
	2. If the minimum and maximum frequencies of the synthesizer
	frequency range are not the endpoints desired for the frequency
	list,use the Auto Fill Start and Auto Fill Stop softkeys
	to,define the frequency list endpoints. Then, use either the
	Auto Fill Incr or Auto Fill #Pts softkeys to create the list.
	A list created by this method is ordered with the lowest frequency
	as the first point and the highest frequency as the last point of the
	frequency list.
	Editing F’requency	Points
	To add a frequency point to the list, place the active entry arrow -->
	where you want the next frequency point to appear. The frequency
	point is added directly after the value indicated by the arrow.
	Lists created by the Auto Fill method are appended to an existing
	list much the same way frequency points are added to a list. The
	newly created list is added between the frequency point indicated by
	the active entry arrow and the point directly after it.
Note
	If adding a new list of frequencies causes the existing list to exceed
	the maximum number of frequency points allowed (801), the new list
	is not appended to the existing list. The error message TOO MANY
	LIST PTS REQUESTED is displayed.

L-8 Operating and Programming Reference	HP 8360
User’s	Handbook