HP 8360 manual Start Sweep Trigger Ext, Step Control Master

Start Sweep

Trigger Ext

Function Group

Menu Map

Description

SWEEP

7

When this softkey is selected, the synthesizer waits for an external hardware trigger to trigger a sweep. Connect the trigger pulse to TRIGGER INPUT. It is activated on a TTL rising edge. An asterisk next to the key label indicates that this feature is active.

Programming Codes

See Also

SCPI: TRIGger:SOURce EXT

Analyzer: T3

(CONT), [m), Sweep Menu

Step Control

Master

Function Group FREQUENCY

Menu Map 2

Description This softkey lets you designate the synthesizer as the master control in a dual synthesizer measurement system. A dual synthesizer system (two-tone measurement system) facilitates accurate device characterizations by providing one timebase reference for both sources. This technique reduces instabilities from temperature or line voltage fluctuations, or drift.

The synthesizers can be operated in either ramp sweep or step sweep modes for both fixed offset and swept offset measurements. Figure S-l shows the connections required for a two-tone system.

S-64 Operating and Programming Reference	HP 8360
User’s	Handbook