HP 8360 manual Menu Map 2,s, TOO Many Correction PTS Requested, TOO Many List PTS Requested

Auto Fill Incr

Auto Fill Incr

Function Group FREQUENCY, POWER

Menu Map 2,s

Description This softkey is used in two locations: Fitness Menu and

List Menu.

Flatness Menu - When selected, the synthesizer waits for a frequency

increment value to be entered. --> Increment: is displayed in the active entry area. A list of frequencies is created automatically, beginning at the auto fill start frequency and always ending with the auto fill stop frequency. The synthesizer uses the increment value on all points, but if the stop frequency requires a different increment to be used to be exact, the synthesizer simply ends the frequency list at the stop frequency disregarding the increment value.

If the increment value requested creates a list that exceeds the number of elements available, the following message appears:

TOO MANY CORRECTION PTS REQUESTED

List Menu - When selected, the synthesizer waits for a frequency

increment value to be entered. --) Increment: is displayed in the active entry area. A list of frequencies is created automatically, with all points separated by the frequency increment value. The list begins at the auto fill start frequency and ends at a frequency less than or equal to the auto fill stop frequency.

If the increment value requested creates a list that exceeds the number of points available (801), the following message appears:

Programming Codes

See Also

TOO MANY LIST PTS REQUESTED

SCPI:NONE,see Fltness Menu or List Menu Analyzer: NONE

Fltness Menu, List Menu

“Optimizing Synthesizer Performance” in Chapter 1.

HP 8360	Operating and Programming Reference A-23
User’s Handbook